Saturday, November 12, 2016
How to Downgrade Your iPhone 3GS 3G Baseband for Unlock Windows
How to Downgrade Your iPhone 3GS 3G Baseband for Unlock Windows
Step One
Create a new folder on your desktop called Pwnage.
In the folder place the current firmware of your device (which can be downloaded from here) and the latest version of RedSn0w (from here).
Extract the RedSn0w zip file by double clicking it.
Step Two
Launch the redsn0w application from the redsn0w folder we extracted earlier. You can do this by right clicking the executable and selecting Run as Administrator contextual menu.
Step Three
Once RedSn0w opens click the Extras button.
Step Four
Choose Select IPSW from the Extras menu.
Step Five
Navigate to the Pwnage folder on your desktop, choose the firmware ipsw we downloaded earlier, and click Open.
Click OK to confirm your selection.
Tell RedSn0w whether you have a newer or older model iPhone 3GS.
Step Six
Press Back to get back to the main menu then click the Jailbreak button.
Step Seven
RedSn0w will now prepare the jailbreak data.
Step Eight
Check the Downgrade from iPad baseband checkbox, disable Cydia if you already have it installed, and click Next proceed through the normal DFU ramdisk steps.
Step Nine
Plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode..
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now be exploited with limera1n and reboot
Step Twelve
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.
Step Thirteen
RedSn0w will now inform you that its work is done. The rest of this process will take place on your device.
Step Fourteen
After showing some scrolling text, your iPhone will display the pwnapple icon and say Flashing Baseband. THIS STEP TAKES A VERY LONG TIME to complete and there wont be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.
Step Fifteen
Once the phone has rebooted you will be on the 05.13.04 baseband. .
Go to link Download
Monday, October 31, 2016
How To Can Unlock Any Modem
How To Can Unlock Any Modem
to access the internet at all because you will not be able to use any other SIM card with your modem.
also help you to spend less by buying modems of other network providers separate by separate.
you do not use the comment form on my blog (www.just4bloggers.blogspot.com), I might keep still .So, kndly adhere to the instruction.
arrangement can be made just HIT Me On 08091996286.
Profile Name: MTN
APN: web.gprs.mtnnigeria.net
Username : web
Password : web
Profile Name: Glo
APN: gloflat
Username : :flat
Password : flat
Profile Name: Zain
APN: internet.ng.zain.com
Username : internet
Password : internet
Profile Name: Etisalat
APN: etisalat
Username :web (you can also leave it blank)
Password : web (you can also leave it blank)
Go to link Download
Thursday, October 20, 2016
How to get unlock codes for blackberry
How to get unlock codes for blackberry

Frequent travelers will find this characteristic is very useful, because they are not required to get a brand new phone if they visit a different country, or whether there is a need to cover substantial roaming charges when you explore other countries. If you are using a Blackberry phone is open, you do not have to have a blackberry locked wherever you go. Also, you will get many benefits from an open smart phone.
Basically, to open the Blackberry, you may do so in three basic methods. All of these strategies will still require the unlocking code. The first way is to open the Blackberry itself, you can find the unlocking code can be trusted on the web because there are several websites providing free MEP program code.
You must be careful here to avoid buying fake code that can not meet your needs. You also need to be careful because there are many rip-offs who just want to take your money and give nothing back but could not find the code that actually works. Be sure to learn all the testimonials provided by previous customers about the legitimacy and the dependence of companies that provide you with the code!
A safer way to unlock Blackberry mobile phone use this code with the help of a technician who has the code. Technician will not only give you the code to open, he can also help you to unlock your phone! Thus, you really can relax about everything,
These technicians generally experienced, so you can feel comfortable knowing that your BlackBerry is in safe hands if you give it to them. Also, you have the guarantee of paying only when your phone can be successfully opened, something that can not be achieved from online services.
Finally, you also can buy either immediately open the Blackberry. You just need to make sure that you choose a shop that sells mobile phones in factory-produced state. If you buy a smart phone in this way, you can take advantage of all the GSM system anywhere without any worries, because the phone, you can detect and receive all the GSM system without any limitation.
From:unlockerblackberry.blogspot.com
Go to link Download
Wednesday, October 19, 2016
How to Root and unlock Samsung Galaxy Tab 10 1 P7500
How to Root and unlock Samsung Galaxy Tab 10 1 P7500
- First root your tab (cant be unlock on 3.2)
- Turn debugging on
- Use Z3X 3G Tool v12.4 and press unlock. Simple
Here is how to root your Galaxy Tab 10.1:
This method is done on Windows. I recommend this way as its the easiest. If you dont have Windows, borrow from a friend.
?Downloading Files and Installing Drivers?
Download the root.zip from here.
Extract the zip file by right clicking and selecting "Extract All," or by using an extracting program of your choice.
Open the folder and double click the driver file labeled "GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe"
Install the driver. Its pretty much just Next, Next, Install, and Exit when its done.
?Connecting the Device?
Turn on USB Debugging by going to Settings>Applications>Development and checking USB debugging. Click Okay to confirmPower off the device by holding the power button and selecting Power offPut the device into Downloading modeHold the Vol Down button (the left Volume button) and then hold the Power button as well.
Keep holding until you see two icons. First youll see the Samsung Galaxy Tab 10.1 logo and then the icons will show up. Let go.
Press the Vol Up button (the right Volume button) to select Downloading mode.
Connect the device to your computer with the USB cable.
?Flashing a Custom Recovery?
Go into the same root folder as before.
Double click the root application named "Odin3_v1.85.exe"
Select PDA Double click the clockworkmod recovery file labeled "recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5" to select it. Click Start
Once it is complete, you can close the program
?Completing the Root?
Disconnect your USB cable
On your device, turn off USB Debugging by going to Settings>Applications>Development and unchecking USB debugging
Plug your USB cable back in
On your computer, go to the same root folder as before and transfer the zip file labeled "Samsung_Galaxy_Tab_10.1_root.zip" to your device. Dont put it inside any folder.
Confirm that it was transferred by clicking inside the device folder
Power off the device by holding the power button and selecting Power off
Put the device into Recovery mode
Hold the Vol Down button (the left Volume button) and then hold the Power button as well.
Keep holding until you see two icons. First youll see the Samsung Galaxy Tab 10.1 logo and then the icons will show up. Let go.
Press the Vol Down button (the left Volume button) to highlight the left icon.
Press the Vol Up button (the right Volume button) to select Recovery mode.
You should see that you are in ClockworkMod Recovery. If not, start over
Use the volume buttons to highlight "Install zip from SD card" and hit the Power button to select it.
Use the volume buttons to highlight "Choose zip from SD card" and hit the Power button to select it.
Use the volume buttons to highlight "Samsung_Galaxy_Tab_10.1_root.zip" and hit the Power button to select it.
Use the volume buttons to highlight "Yes - Install..." and hit the Power button to select it.
When it finishes, the last line should say "Install from sdcard complete."
Use the volume buttons to highlight "*****Go Back*****" and hit the Power button to select it.
Hit the Power button to select "reboot system now".
Your device will reboot.
Youre now rooted!
************************************************** ***
********** Big Thanks to XDA contributor djR3Z *************
************************************************** ***
Source: [GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]
100% working solution and tested by me.
If it helps you Click THANKS.....
Go to link Download
Sunday, October 9, 2016
How can I unlock my iPhone if I forgot the passcode
How can I unlock my iPhone if I forgot the passcode
Image Credit: EveryiPhone.com (iPhone Passcode Screens - iOS 6, Left; iOS 7, Right)
If you repeatedly enter the wrong passcode, your iPhone will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you wont be able to try again until you connect it to the computer with which you last synced it [if it has been synced to a computer].
Note: You can configure your device to erase itself after ten consecutive incorrect password attempts. This setting is off by default. It can be turned on by tapping Settings > General > Passcode Lock.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it [or iCloud]. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.Please also note that Apple representatives cant unlock an iPhone for you without restoring the iPhone, either. The restore process will erase everything on it.
To restore your iPhone -- which, again, deletes all of your data (songs, photos, videos, apps, and so on) on the iPhone use the following directions. Be absolutely sure that you have backed up the content on your iPhone before restoring it.
After the backup, you just need to "restore" your iPhone and have the backup copied onto the iPhone with iTunes.
Apples official instructions to restore an iPhone with iTunes are:
- Connect your iPhone to your computer [that you have previously used to sync the device].
- In iTunes, select the iPhone in the "Devices" list, then "Summary" at the top of the screen.
- If iTunes doesnt automatically synchronize your iPhone, do so manually [and confirm that the sync and backup were successful.]
- Click Check for Update. iTunes tells you if there is a newer version of the iPhone software available.
- Click Restore. Follow the onscreen instructions to complete the restore process. When restoring, it is recommended that you [again] backup the iPhone when prompted.
- When iOS Setup Assistant asks to set up your iPhone, choose "Restore from iTunes backup."
- Select your device in iTunes and choose the most recent backup of your iPhone.
Apple separately explains the simple iCloud process to erase an iPhone. This is mostly intended for an iPhone that has been lost or stolen, but the portion relevant for a forgotten password is:
- Sign in to iCloud with your Apple ID (the one you use with iCloud [rather than your iPhone passcode that you do not remember]), then click "Find My iPhone."
- Click "All Devices," then select the iPhone you want to erase.
- In the Info window, click "Erase iPhone."
- Enter your Apple ID password [for confirmation]. If the device youre erasing has iOS 7 or later, enter a phone number and message. [This is intended to be displayed to anyone who may have found your iPhone if it is lost or stolen. To just erase the iPhone, it is not necessary.]
- [Now] you can restore the information on the device using iCloud Backup (if backup was turned on before you erased it).
If you find yourself in this situation try not to panic. Take a deep breath. Leave your iPhone behind, go for a walk, and try not to think about the passcode per se. Separating yourself from the frustration may help jog your subconscious to release the information you have forgotten.
If you still do not remember your passcode when you return, hold the iPhone in your hand and ideally sit or stand somewhere where you know you have entered your passcode before.
If that is not an option, try to face a direction that you were facing when you successfully entered your passcode previously. Relax. Close your eyes. Open your eyes again. Enter the passcode without a conscious effort to remember the numbers or letters but instead "feel" it. You may be able to essentially trigger "muscle memory" of the motion pattern you have used before to enter the code.
If none of that works, sadly, you will have to start over as if you just got a new iPhone. If you have only had the iPhone for a few days (which is when people tend to forget the passcode the most, perhaps it is not a major problem).
If you recently set a passcode on an iPhone with a lot of personal information that is not synchronized using iTunes or backed up using iCloud and this information is really important to you, you could consider buying a new iPhone without restoring the old one. The hope would be that you might remember the passcode at some point in the future. Perhaps buying an expensive new phone will allow you to remember the passcode the next day. Doh!
Nevertheless, next time, either (1) do not use a passcode, (2) use the fingerprint enabled Touch ID on the iPhone 5s instead, or (3) be sure to sync your lesser iPhone with iTunes and/or iCloud.
Go to link Download